View all Oyaide products

 

  • The premium 4P SCHUKO power distributor

    The simplicity is what comes with wider use and what makes people use for a long time.
    This "MTS-4e" power distribution strip is lined up as an entry model and is created by based on our long-time knowhow. Due to the employment of detachable power cord, you can enjoy trying various power cable and selecting your favorite sound character.

    The premium 4P SCHUKO power distributor

    Features

    Dual-Spring vise structure for receptacles
    The Dual-Spring vise structure is newly-developed for the contacts of our new outlet, SWD-XXX. Due to its strong holding power and 9mm wide contact area, the contacts tightly hold the inserted pins and reduce vibration at the contacts with no loss of signal transmission.

    Chassis
    The chassis of MTS-4e is made of highly rigid stainless steel which is non-magnetic SUS 304. It protects from not only vibration but also electric-magnetic wave or external noise contermination. And all components, from 6.0mm thick contact down to stainless screws, are made of non-magnetic substance.

    Audio grade solder
    For the soldering connection, we employed SS-47 audio grade solder.
    Compared to general solders which usually contain 3N (99.9%) pure tin, SS-47 contains 4N (99.993%) pure tin achieved by excluding impurities to the maximum. Furthermore, 4.7% silver and 1.7% copper are contained for the purpose of improvement of electric conductivity and durability.

    Inlet
    The inlet is designed specially for MT series. The contacts are made of brass. The plating is a combination of silver (1.5μ) and rhodium (0.3μ). The body is made of 30%GF PBT.

    Damping sheet
    We adapted VEM 313 sheet (Visco Elastic Material) for damping material for the inside of the chassis.

    internal wiring
    For its internal wiring, we employed 2mm 4N OFC copper wire. And for its insulator, we employed low-dielectric polyorefin resin.

    Brass spikes
    For the better separation from the floor, we specially employed accurately machined brass spikes. Although it is set to four-point support as default, three point support is also applicable according to your preference.

    Specifications

    # of outlets
    4
    Internal
    OFC 2mm
    Receptacles
    Original SWD-XXX-E (24K gold + Palladium plating)
    Inlet
    IEC320 INRET
    Dimentions
    W 75 × H 53 × L 320
    Weight
    1.9Kg
    Chassis
    1.6mm stainless
    Rated V/A
    250V 10A AC
    Release Date
    2005/07/15

    Price

    Τελική πληρωτέα τιμή: 660
  • The premium 6P SCHUKO power distributor

    The simplicity is what comes with wider use and what makes people use for a long time.
    This "MTS-6e" power distribution strip is lined up as an entry model and is created by based on our long-time knowhow. Due to the employment of detachable power cord, you can enjoy trying various power cable and selecting your favorite sound character.

    The premium 6P SCHUKO power distributor

    Features

    Dual-Spring vise structure for receptacles
    The Dual-Spring vise structure is newly-developed for the contacts of our new outlet, SWD-XXX. Due to its strong holding power and 9mm wide contact area, the contacts tightly hold the inserted pins and reduce vibration at the contacts with no loss of signal transmission.

    Chassis
    The chassis of MTS-6e is made of highly rigid stainless steel which is non-magnetic SUS 304. It protects from not only vibration but also electric-magnetic wave or external noise contermination. And all components, from 6.0mm thick contact down to stainless screws, are made of non-magnetic substance.

    Audio grade solder
    For the soldering connection, we employed SS-47 audio grade solder.
    Compared to general solders which usually contain 3N (99.9%) pure tin, SS-47 contains 4N (99.993%) pure tin achieved by excluding impurities to the maximum. Furthermore, 4.7% silver and 1.7% copper are contained for the purpose of improvement of electric conductivity and durability.

    Inlet
    The inlet is designed specially for MT series. The contacts are made of brass. The plating is a combination of silver (1.5μ) and rhodium (0.3μ). The body is made of 30%GF PBT.

    Damping sheet
    We adapted VEM 313 sheet (Visco Elastic Material) for damping material for the inside of the chassis.

    internal wiring
    For its internal wiring, we employed 2mm 4N OFC copper wire. And for its insulator, we employed low-dielectric polyorefin resin.

    Brass spikes
    For the better separation from the floor, we specially employed accurately machined brass spikes. Although it is set to four-point support as default, three point support is also applicable according to your preference.

    Specifications


    # of outlets
    6
    Internal
    OFC 2mm
    Receptacles
    Original SWD-XXX-E (24K gold + Palladium plating)
    Inlet
    IEC320 INRET
    Dimentions
    W 75 × H 53 × L 460
    Weight
    2.7Kg
    Chassis
    1.6mm stainless
    Rated V/A
    250V 10A AC
    Release Date
    2005/07/15

    Price

    Τελική πληρωτέα τιμή: 900 €
  • A Do-It-Yourself kit of MT series power distributor

    The MT-UB is a product which is prepared for D.I.Yers who know the enjoyment of self construction.
    The body is made of 2.0mm thick brass board which is highly rigid and has excellent vibration damping property. For Its surface treatment, a combination of nickel and chrome plating is applied to control the hardness of the body. Coupled with the shielding effect of brass, nickel plating reduces exogenous noise in wide frequency range.

    The MT-UB power distributor

    Features

    Brass spikes
    For the foot of MT-UB, we specially employed accurately machined brass spikes for the better separation from the floor.

    Mounting pole
    The mounting poles are set up not only for mounting receptacles but also for minimizing the resonance between receptacles and chassis. Moreover, for the perfect insulation, we put urea resin washers on both sides of mounting flame of receptacles.
    These enhance power and energy of sound sources. Simultaneously, there have excellent vibration damping property with the heavy chassis.

    Selectable connection part (optional)
    There is a hole for attachment of IEC inlet on the side of MT-UB. However, for who wants to attach a power cable directly to the MT-UB, we prepared optional cable clamp and framing plate.

    Specifications

    Main chassis
    2.0mm chrome plated brass
    Receptacles
    UL standard
    Connection
    IEC 320 AC or optional cable clamp
    Dimentions
    W 70 × H 50 × L 270
    Weight
    1.25Kg
    Chassis
    2.0mm chrome plated brass

    Price

    Τελική πληρωτέα τιμή: 247 €