View all Oyaide products

  • 4N pure silver for center pin. The high-quality gateways of lossless signal transmission

    The plugs are the gateways of signal transmission and define the quality of sound. As the original plug of SL series, SLSC and SLSB are produced to maximum potential of cable. We employed 4N pure silver which has the highest electrical conductivity in all metals for the contact pin. SLSC/SLSB actualize transmitting high-quality and lossless sound.



    Feautures

    Outer shell

    The body and housing of SLSC/SLSB, made of brass and processed by CNC machining, are high-density and have high shielding performance compared to an existing lost-wax processed body. For its surface treatment, hard chrome plating is coated like a body of camera. The knurled pattern on the surface of SLSC enhances the handling property.

    Contact pin

    The contact pin is trimmed down from 4mm 4N silver round bar by precision CNC machining. It is finished by mechanical barreling and hand polishing piece by piece.。

    Insulator

    The insulator is significant factor in enhancing the transmitting capabilities of the cable. For the purpose of lessening signal loss, we employed PTFE which provides excellent electrical isolation and low electric permittivity.

    Specifications

    Material
    Center pin : 4N pure silver
    Outer shell : Chrome plated brass
    Connection method
    Soldering
    Install O.D
    max 9.0mm
    Packing
    4 pcs in a box
    Release date
    2004/01/20

    Price

    Τελική πληρωτέα τιμή: 170 €  (4 pce. Set)
  • Oyaide original Spade rug

    We consider that the cable terminal is one of the most important parts in the audio components. SPYT (silver) and GYT (gold) are especially designed for additional tone control without changing cable character. After it is punched out from 2mm thick oxygen-free copper board, it is hand-polished twice. Then, SPYT is plated silver (inner) and palladium (outer) and GYT is plated 24K gold. In order to produce a good product, Oyaide Electric doesn't hesitate to take time-consuming process. The form is cut in two-size adjustment (6mm and 8mm) to be applied to almost all speaker post.



    Specifications

    Material
    Oxygen Free Copper(OFC)
    Plating
    SPYT : Silver + Palladium
    GYT : 24K Gold
    Connection method
    soldering or pressure bonding
    Speaker post diameter
    6.0 or 8.0mm
    Maximum cable diameter
    5mm 10Sq
    Attachment
    heat shrink tube (4pcs)
    Packing
    4 pcs in a box
    Release Date
    2004/12/10

    Price

    Τελική πληρωτέα τιμή: 50 €  (4 pce. Set)
  • Japanese precision work

    We enhance our product quality by paying careful attention to each detail of structural characteristic, texture and appearance. When such details are integrated successfully, a product is completed perfectly. All elements, the impression of rigidity, beautiful guilloche pattern on the surface inspired by luxurious Swiss watch, brilliance of the buff finished body, and the blue stainless-steel screws which are reminiscent of clock hands, represent sublime sound image of SRBN. SRBN is the extreme banana plug which is created by the fusion of the excellent sound and design quality.

    In order to make style and sound perfect, we at Oyaide consider clear design concept and examination of details and materials very important. The main body is trimmed from an 8 mm phosphor bronze bar and then its insertion part is slit up in a cross shape and divided in quarters to ensure maximum contact area in the terminal. The size was determined based on WBT’s speaker terminals, but it can be fit in any terminals. After more than ten times of repeated cut and try in micron scale, SRBN was exquisitely-designed to be inserted smoothly and not to be come off easily.

    The highly-rigid 5mm stainless screw is used for the 4mm cable penetration part. This infills inside space between the body and the screw. The blue screws, made of stainless with quench hardening treatment, are highly-rigid and emphasize the beauty of SRBN. After careful polishing by hand and mirror finishing, the body is completed with silver (inner) and rhodium (outer) plating.


    Feautures

    Material / Structure

    Smooth and Tight. This is the theme that SRBN aimed to only by characteristic of materials. To hold tightly by using minimum components, SRBN is made by deoxidized phosphor bronze which is used in many contacts due to its excellent springiness and electric property.

    When SRBN are planned, we paid most careful attention to the design of its contact tip. It is slit up in a cross shape and divided in quarters to ensure the maximum contact area and is designed to be fit tightly into terminals when it is inserted.
    The size was determined based on WBT’s speaker terminals, but it can be fit in any terminals. After more than ten times of repeated cut and try, SRBN was exquisitely-designed to be inserted smoothly and not to be come off easily.

    The maximum install cable O.D is 4mm (5.5sq).
    By employing 5mm dual screw connection system, it infills inside space and holds conductor perfectly. The blue screws, made of stainless with quenching treatment, are highly-rigid and emphasize the beauty of SRBN.
    srbn_FIG_e.gif


    Processing

    The design concept of SRBN is inspired by “Breguet”, the luxurious Swiss watch. The slip resistance engraved on the body is reminiscent of Guilloche pattern on a surface. Furthermore, the screw is blue steel processed by quench hardening using same technique as hands of a watch for the purpose of improvement of mechanical strength and oxidation resistant.

    The body is trimmed down from 8mm phosphor bronze bar by precision CNC machining. It is finished by mechanical barreling and hand polishing piece by piece. The plating of the mirror finished body is a combination of silver (1.5μ, inner) + rhodium (0.3μ, outer).

    Specifications

    Material
    Phosphor bronze
    Plating
    Silver (1.5μ)+ Rhodium(0.3μ)
    Connection
    Dual clamping screw system
    Diameter
    8.0mm
    Install cable O.D
    4.0mm(5.5sq)
    Packing
    4 pcs in a box
    Attachment
    L-form hex wrench
    Release Date
    2008/06/25

    Price

    Τελική πληρωτέα τιμή: 120 €  (4 pce. Set)
  • A high definition sound projector

    We enhance our product quality by paying careful attention to each detail of structural characteristic, texture and appearance. Only when such details are integrated successfully, a product is completed perfectly. At Oyaide, we spare no effort in spending time for those creative works. It took a whole year to complete "FOCUS 1" XLR connector since the first product planning. The design is inspired by an appearance of lens on a camera which represent subtle and exquisite sound image of FOCUS 1. As a result of integration of high-quality sound and efficient design, a masterpiece XLR plug, FOCUS 1, was produced by uncompromising spirit and technical know-how of Oyaide Electric.



    Feautures

    Originality

    One-touch push-pull function is the entirely-new locking system. You can lock Just by inserting FOCUS 1 into the inlet and unlock by pulling the tip ring. Ball bearing system, manufactured by ultraprecision machining, is employed for its locking mechanism. These functions deliver smooth and absolute plug connection.
    In addition, an innovative idea is utilized for the contact of FOCUS1.
    The No.1 contact pin (earth) is 3mm longer than other pins, so that it contacts fast for the purpose of protection from POP noise at the moment of connection.
    Furthermore, bladed cable clump is employed for cable fixture. By applying this clumping system, it is possible to connect chassis ground and stabilize cable simultaneously.

    Material

    The contact pins of FOCUS 1 are made from phosphor bronze bar which is precisely shaped by CNC machining. After careful machine barreling, silver (inner) and rhodium (outer) are directly plated on them. Then, these pins are molded into highly rigid 30% glass filled PBT which insures high-speed vibration attenuation.
    The body and housing, processed by CNC machining, are high-density and have high shielding performance compared to an existing lost-wax processed body. For its surface treatment, hard chrome plating is coated like a body of camera.

    Usability

    Due to its 12mm install cable O.D. (when cable bushing is removed), it gives infinite possibility to do-it-yourselfers. And its tapered insertion hole makes cable installation easier and avoids from cable disconnection by bending.
    Furthermore, a rubber ring which is installed at the junction of the body and housing acts as vibration damper and loosening protector.

    Appearance designing

    The design of FOCUS 1 is inspired by an appearance of lens on a camera which projects subtle and exquisite image.
    For the identification of channel L and R, the SWAROVSKI rhinestones, blue and red, are enchased on the surface of its body.
    The beauty of its body design and a brilliance of SWAROVSKI enhance the appeal of this product and produce a sense of expectancy.

    Specifications

    Material
    Contact Pin : deoxidized Phosphor Bronze
    Insert Resin : PBT 30%GF
    Housing Shell : Brass (RHoS compliant )
    Cable Clump : Brass (RHoS compliant )
    Contact Pin : Silver plating(1.5μ)+ Rhodium plating(0.3u)
    Surface finishing
    Cable Clump : Nickel plating
    Housing shell : Hard chrome plating
    Cable connection method
    Soldering
    Install cable O.D.
    6.0mm~12.0mm(without cable bush)
    Packing
    4 pieces in a box(2males,2females)
    Release date
    2008/08/25

    Price

    Τελική πληρωτέα τιμή: 250 €  (4 pce. Set)
  • 3.5 stereo mini plugs: P-3.5G/P-3.5GL & P-3.5SR/P-3.5SRL

    Appearances of Digital music players expanded the field of listening to music unlimitedly. Due to their convenience and portability, not only general users but also audiophiles regard them as the music player of the new generation.

    And then, various related accessories such as portable amp and monitors such as headphones and desktop speakers are released for better sound quality.

    Changing a headphone cable is of course one of the very important factors for improvement sound quality.

    At the same time we produced HPC series headphone cable, we developed the hi-quality 3.5mm stereo mini plug, P-3.5 series” for D.I.Yers who love to customize their special accessories.

    Please enjoy crafting your own cables with P-3.5 series which are produced by the accuracy of “Made in Japan”.



    Feautures

    Material/Structure

    For its contact material, we employed RoHS compliant brass. The center pin which is core of the signal transfer is plated by thick 24K gold for the P-3.5G/P-3.5GL and pure silver + rhodium for the P3.5SR/P3.5SRL. These protect from erosion and improve the transmission property. The outer shell is cut by accurate NC machining, knurled and chrome plated.

    P3_5G_kouzou_eng.jpg
    P-3.5GLThe inner P-3.5GL (P-3.5SRL as well)

    Specifications

    Plug
    3.5mm stereo mini
    model
    Straight:P-3.5G/P-3.5SR
    Angled:P-3.5GL/P-3.5SRL
    Material
    P-3.5G/P-3.5GL: brass (24k gold plating)
    P-3.5SR/P-3.5SRL: brass (silver + rhodium plating)
    Outer shell
    brass + chrome plating
    Minimum diameter of outer shell
    8.0mm
    Maximum diameter of outer shell
    8.3mm
    Connection
    soldering
    Install cable O.D.
    6.0mm or less
    Release date
    2009/06/10

    Price

    Τελική πληρωτέα τιμή:
    P-3.5G: 12.00 €
    P-3.5GL: 12.00 €
    P-3.5SR: 18.00 €
    P-3.5SRL: 18.00 €
  • Pursuit of the unlimited transparency. The high-fidelity audio grade solder.

    The SS-47, the Oyaide original hi-fidelity solder, is produced in order to maximize the capacity of cables and connecters by eliminating its sound character. After the careful consideration of the importance of the contact and joining area, we finally achieved to produce the high-fidelity audio specialized solder.

    We have tried to improve the quality by always selecting best material for our products. And there is no exception about this audio grade solder, SS-47. Compared to general solders which usually contain 3N (99.9%) pure tin, SS-47 contains 4N (99.993%) pure tin achieved by excluding impurities to the maximum. Furthermore, 4.7% silver and 1.7% copper are contained for the purpose of improvement of electric conductivity and durability.

    As a result of our consideration of flux, it achieved to restrict the corrosion of the surface and residual chlorine to less than 0.12%. In addition, by containing special material, the flux of SS-47 has 83% fast-spreading ratio which indicates great workability.

    SS-47 is the ultimate solder which extract maximum performance of components and actualize stress-free craftwork. You can discover new D.I.Y life with it.



    Feautures

    Material / compounding ratio

    We know the fact that the sound quality is related to the purity of a material.
    Compared to general solders which usually contain 3N (99.9%) pure tin, SS-47 contains 4N (99.993%) pure tin achieved by excluding impurities to the maximum.
    Furthermore, 4.7% silver and 1.7% copper are contained for the purpose of improvement of electric conductivity and durability. By this compounding ratio, the electric conductivity was improved spectacularly and we achieved to set eutectic point to 217℃.

    Usability

    Regardless of your soldering skills, you will be surprised its workability and beautiful finish. We have considered the importance of Skin Effect, the tendency of an alternating electric current (AC) to distribute itself within a conductor so that the current density near the surface of the conductor is greater than that at its core. The surface of SS-47 doesn't disturb the electric signal flow and prevent the electric turbulence.
    In addition, you can finish soldering process in seconds when you use 40W soldering iron. Because of Its dissolution temperature is 217℃ (eutectic point), SS-47 is chilled quickly and doesn't damage other materials.
    The inner P-3.5GL (P-3.5SRL as well)


    Specifications

    Material
    Highly-pure 4N tin : 90.3%
    Pure silver : 4.7%
    Pure copper : 1.7%
    Flux : 3.3%
    Flux
    Less than 0.12% of chlorine content
    Solder diameter
    1.0mm
    Melting point
    217℃
    Certification
    Pb free, RoHS compliant
    Lineup
    50g
    100g
    500g
    1.0kg
    Release date
    2009/04/15

    Price

    Τελική πληρωτέα τιμή:
      100gr:   33.00 €
      500gr: 125.00 €
    1000gr: 230.00 €